What is Stitcher™ Radio? Stitcher™ radio is an application which can be used to listen to Internet radio or stream podcasts.
Recommended content is automatically selected by registering content which you put into your favorites, or by pressing the Like or Dislike button.
For details on Stitcher™ Radio, refer to “http://stitcher.com/”.
* Stitcher™, the Stitcher™ logo, and the Stitcher™ trade dress are trademarks or registered trademarks of Stitcher, Inc., used with permission.
NOTE To operate Stitcher™ Radio from your Bluetooth ® device, perform the following in advance:
Playback
Select the
icon on the home
screen to display the Entertainment screen. When
is
selected, the following icons are indicated in the bottom part of the center
display.
|
Icon |
Function |
![]() |
Displays the Entertainment menu. Use to switch to a different audio source. |
![]() |
Displays the station list. Use to switch to other stations. |
![]() |
Dislike Evaluates the current program as “Dislike”. |
![]() |
Like Evaluates the current program as “Like”. |
![]() |
Adds the current station to your favorites or deletes the current station from your favorites |
![]() |
Reverses for 30 seconds |
![]() |
Plays the station. Select it again to pause playback. |
![]() |
Goes to the next station. |
![]() |
Displays sound settings to adjust audio quality level. Refer to Volume/Display/Sound Controls on . |
Station list
Select it to display the category program.

Add to your favorites
If the current program has not been registered to your favorites, it can be registered to your favorites.
icon to
to add the
NOTE
Delete from your favorites
If the current program has already been registered to your favorites, the program can be deleted from your favorites.
icon.
How to Use Aha
TroubleshootingCrankshaft Position (CKP) Sensor Removal/Installation [Mzr 2.0, Mzr 2.5]
Removal
CAUTION:
When foreign material such as an iron chip is on the CKP sensor, it can cause
abnormal output from the sensor because of flux turbulence and adversely affect
the engine control. Be sure there is no foreign material on the CKP sensor when
replacing.
Do not a ...
Air Intake Actuator Removal/Installation [Full Auto Air Conditioner]
1. Set the air intake mode to FRESH.
2. Disconnect the negative battery cable..
3. Remove the following parts:
a. Front scuff plate (Passenger-side).
b. Front side trim (Passenger-side).
c. Dashboard under cover.
d. Glove compartment.
e. Lower panel (Passenger-side).
f. Shower duct ( ...
Auto Dimming Mirror Removal
1. Disconnect the negative battery cable.
2. Remove the screw.
3. Disconnect the auto-dimming mirror connector.
4. Pull out the rearview mirror toward the vehicle rear.
CAUTION:
When removing the rearview mirror, it may hit the headliner and cause damage.
Hold the ...