Mazda 3 manuals

Subaru Solterra 2023-2026 Owner's Manual: If the vehicle becomes stuck

If your Subaru Solterra becomes immobilized in mud, snow, or loose terrain, follow the steps below to safely regain traction and mobility.

Recovering procedure

1. Turn off the EV system, apply the parking brake, and set the gear selector to P.

2. Clear away mud, snow, or sand from around the tires of the Subaru Solterra.

3. Place traction aids such as wood, stones, or mats beneath the front wheels.

4. Restart the Subaru Solterra EV system.

5. Shift into D or R, release the parking brake, and gently press the accelerator while maintaining control.

■ When it is difficult to free the vehicle

Press Subaru Solterra traction control off button icon to deactivate TRAC for improved wheel spin control.

Subaru Solterra attempting to free vehicle from mud or snow using traction techniques

WARNING

■ When attempting to free a stuck vehicle

If rocking the Subaru Solterra back and forth, ensure the surrounding area is clear of obstacles, vehicles, and people. Sudden release may cause unexpected movement.

Always proceed with caution.

■ When shifting the shift position

Avoid changing the gear position while pressing the accelerator pedal.

This may cause sudden acceleration and increase the risk of a serious accident.

NOTICE

■ To avoid damaging the transmission and other components

If your vehicle overheats
If the message "EV System overheated Output power reduced" appears on the multi-information display of your Subaru Solterra, it indicates that the system temperature has risen beyond optimal limit ...

Vehicle specifications
...

Other materials:

Antenna Feeder No.6 Inspection
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Upper panel. b. Shift knob (MTX). c. Selector lever knob (ATX). d. Shift panel. e. Side wall. f. Console. g. Car-navigation unit. 3. Verify that the continuity between antenna feeder No.6 terminals is as i ...

Clutch Disc Inspection [C66 M R]
Operation Inspection 1. Inspect the lining surface for discoloration and grease adhesion. 2. Inspect the torsion spring for weakness and the rivet for looseness. 3. Using a vernier caliper, measure the depth between the lining surface and the rivet head. Minimum clutch disc thickness ...

Rear Buckle Removal/Installation
Rear Buckle (RH) and Rear Buckle (Center) 1. Remove the rear seat cushion.. 2. Remove the bolt. 3. Remove the rear buckle (RH) and rear buckle (center). 4. Install in the reverse order of removal. Rear Buckle (LH) 1. When removing or installing the rear buckle (LH), refer to the rear ...

� 2016-2026 Copyright www.mazda3tech.com