The Subaru Solterra vehicle load limits define the maximum allowable weight parameters, including total load capacity, seating capacity, TWR (Trailer Weight Rating), and cargo capacity, all of which must be respected for safe operation.
Understanding and correctly applying these limits in the Subaru Solterra ensures optimal handling, braking performance, and long-term durability of the vehicle.
■ Total load capacity and seating capacity
Detailed information for the Subaru Solterra, including load limits and seating capacity, can also be found on the tire and loading information label inside the vehicle.
WARNING
■ Overloading the vehicle
Do not exceed the Subaru Solterra load limits. Overloading may damage tires, reduce braking efficiency, and negatively impact steering control, increasing the risk of accidents.
Cargo and luggage
Trailer towingIntake Air Temperature (Iat) Sensor Inspection [Mzr 2.0, Mzr 2.5]
Resistance Inspection
NOTE:
Because the IAT sensor is integrated in the MAF sensor, replacing the IAT
sensor includes replacement of the MAF/IAT sensor.
1. Remove the battery cover..
2. Disconnect the negative battery cable..
3. Disconnect the MAF/IAT sensor connector.
4. Mea ...
Blind Spot Monitoring (Bsm) Off Switch Inspection
1. Disconnect the negative battery cable..
2. Remove the BSM OFF switch..
3. Verify that the continuity between the BSM OFF switch terminals is as indicated
in the table.
If the continuity is not as indicated in the table, replace the BSM OFF switch.
4. Apply battery po ...
Drive mode select switch
The drive modes of the Subaru Solterra can be adjusted to match different
driving conditions, ensuring optimal performance, efficiency, and comfort.
Selecting a drive mode
By pressing the drive mode select switch, the Subaru Solterra cycles through
three distinct driving modes: Power mode, Nor ...