Subaru Solterra 2023-2026 Owner's Manual: Driving
- Before driving
- Driving procedures
- Operating the lights and wipers
- Using the driving support systems
- SUBARU Safety Sense software update
- SUBARU Safety Sense
- Driver monitor
- PCS (Pre-Collision System)
- LTA (Lane Tracing Assist)
- LCA (Lane Change Assist)
- LDA (Lane Departure Alert)
- PDA (Proactive driving assist)
- RSA (Road Sign Assist)
- Dynamic radar cruise control
- Cruise control
- FCTA (Cross Traffic Alert)
- Emergency Driving Stop System
- Traffic Jam Assist
- BSM (Blind Spot Monitor)
- Safe Exit Assist
- SUBARU Parking Assist
- RCTA (Rear Cross Traffic Alert)
- RCD (Rear Camera Detection)
- PKSB (Parking Support Brake)
- Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle)
- Parking Support Brake function (moving vehicles rear of the vehicle)
- Parking Support Brake function (pedestrians rear of the vehicle)
- Advanced Park
- Types of cameras and sensors used for the Advanced Park
- Advanced Park guidance screens
- Advanced Park perpendicular exiting (forward/ reverse) function
- Advanced Park cancelation/ suspension
- Drive mode select switch
- X-MODE
- Driving assist systems
- Driving tips
My Settings
In the Subaru Solterra, the My Settings function enables personalized
driver recognition using various authentication devices, automatically restoring
individual driving preferences and vehicle co ...
Before driving
...
Other materials:
Adjuster Anchor Removal/Installation
WARNING:
The side air bag sensor is attached to the lower part of the B-pillar. When
working around the B-pillar, disconnect the negative battery cable or work carefully,
avoiding excessive impact to the lower part of the B-pillar.
1. Remove the following parts:
a. Front sc ...
Front Side Marker/Front Turn Light Bulb Removal/Installation
1. Disconnect the negative battery cable..
2. Slightly bend back the front mudguard..
3. Rotate the front side marker/front turn light socket in the direction of the
arrow shown in the figure.
4. Remove the front side marker/front turn light bulb.
5. Install in the reverse order of ...
Variable Swirl Shutter Valve Switch Inspection [Mzr 2.3 Disi Turbo]
Voltage Inspection
NOTE:
The variable swirl shutter valve switch cannot be removed as a single unit.
When replacing the variable swirl shutter valve switch, replace it together
with the intake manifold as a single unit.
1. Switch the ignition to ON (Engine off).
2. Verify that ...
