Subaru Solterra 2023-2026 Owner's Manual: Using the driving support systems
- SUBARU Safety Sense software update
- SUBARU Safety Sense
- Driver monitor
- PCS (Pre-Collision System)
- LTA (Lane Tracing Assist)
- LCA (Lane Change Assist)
- LDA (Lane Departure Alert)
- PDA (Proactive driving assist)
- RSA (Road Sign Assist)
- Dynamic radar cruise control
- Cruise control
- FCTA (Cross Traffic Alert)
- Emergency Driving Stop System
- Traffic Jam Assist
- BSM (Blind Spot Monitor)
- Safe Exit Assist
- SUBARU Parking Assist
- RCTA (Rear Cross Traffic Alert)
- RCD (Rear Camera Detection)
- PKSB (Parking Support Brake)
- Parking Support Brake function (static objects front and rear of the vehicle/static objects around the vehicle)
- Parking Support Brake function (moving vehicles rear of the vehicle)
- Parking Support Brake function (pedestrians rear of the vehicle)
- Advanced Park
- Types of cameras and sensors used for the Advanced Park
- Advanced Park guidance screens
- Advanced Park perpendicular exiting (forward/ reverse) function
- Advanced Park cancelation/ suspension
- Drive mode select switch
- X-MODE
- Driving assist systems
Windshield wipers and washer
The Subaru Solterra windshield wiper system offers both automatic
rain-sensing operation and manual control, allowing precise adjustment for various
weather conditions. The washer system can also ...
SUBARU Safety Sense software update
To access and fully utilize these advanced features in the Subaru
Solterra, an active connected services subscription provided by SUBARU is required.
For complete details regarding activation, ava ...
Other materials:
Manifold Absolute Pressure (Map) Sensor/Intake Air Temperature (Iat) Sensor
No.2 Removal/Installation [Skyactiv G 2.0]
NOTE:
Because the IAT sensor No.2 is integrated in the MAP sensor, replacing the
IAT sensor No.2 includes replacement of the MAP sensor/IAT sensor No.2.
1. Remove the battery cover..
2. Disconnect the negative battery cable..
3. Disconnect the MAP sensor/IAT sensor No.2 connecto ...
Rear Bumper Removal/Installation
4SD
1. Disconnect the negative battery cable..
2. Remove the rear combination light..
3. Remove the fastener A and screw B.
4. Remove the rear splash shield..
5. Remove the screws C.
6. Remove the bolts D.
7. Affix the protective tape to the position shown in the figure.
...
Parking Brake
CAUTION
Driving with the parking brake on
will cause excessive wear of the brake
parts.
NOTE
For parking in snow, refer to Winter Driving regarding parking
brake use.
Setting the parking brake
Depress the brake pedal and then firmly
pull the parking brake lever fully upwar ...
