Location of the storage features
WARNING
■ Items that should not be left in the vehicle
Do not leave glasses, aerosol cans, or similar items inside the Subaru Solterra storage compartments, especially in hot conditions, as they may deform, leak, or break.
Console box
■ Console box lid
The Subaru Solterra console lid can be smoothly moved forward or backward to suit driver preference and improve usability.
■ Tray within console box
The removable tray inside the Subaru Solterra console box can be lifted out for easier access and cleaning.
WARNING
■ Caution while driving
Always keep the console box securely closed while driving the Subaru Solterra to prevent injuries during sudden stops or collisions.
NOTICE
■ To prevent damage to the console box
Avoid applying excessive pressure to the armrest or lid to maintain long-term durability.
Cup holders
■ Front
Slide the cover backward to access the front cup holders in the Subaru Solterra.
■ Rear
Lower the rear armrest to reveal the rear cup holders.
WARNING
■ Items unsuitable for the cup holders
Only place cups or cans in the Subaru Solterra cup holders. Other objects may become projectiles during sudden braking or collisions.
Hot beverages should be covered to reduce the risk of burns.
Bottle holders
■ Front
■ Rear
■ Bottle holders
NOTICE
■ Items that should be not stowed in the bottle holders
Do not place open containers or fragile items such as glass bottles or paper cups with liquids into the Subaru Solterra bottle holders to prevent spills or breakage.
Card holders
Lower the sun visor to access the card holder.
Auxiliary box (if equipped)
Press the lid to open the auxiliary storage compartment.
Open tray
WARNING
■ Caution while driving
When using the open tray in the Subaru Solterra, ensure that items are properly secured. Loose objects may move or fall out during sudden braking or sharp turns, potentially interfering with pedal operation or distracting the driver.
The thoughtfully designed storage and lighting systems of the Subaru Solterra enhance everyday usability, combining practicality with modern convenience while maintaining safety and efficiency.
Luggage compartment featuresDoor Sash Film Installation
1. Remove any grease or dirt from the affixing surface of the door.
2. Cut away the unused portion along the dotted lines.
3. Peel off the backing paper and attach the door sash film onto the door as
shown in the figure.
Standard clearance
a: 3.0—5.0 mm {0.12—0.19 in}
...
Wastegate Control Solenoid Valve Inspection [Mzr 2.3 Disi Turbo]
Airflow Inspection
1. Remove the battery cover..
2. Disconnect the negative battery cable..
3. Remove the wastegate control solenoid valve..
4. Inspect the airflow between the ports under the following conditions.
If not as specified, replace the wastegate control solenoid val ...
Fuse Panel Description
Fuse block (Engine compartment)
*1 With xenon fusion headlights
*2 With halogen headlights
Fuse block (Left side)
...