Mazda 3 manuals

Tesla Model 3 2017-2022 Owner's Manual: Charging Status and Settings

The charging screen displays on the touchscreen whenever the charge port door is open. To display the charging screen at any time:

Touch the charging icon on the
"Cards" area on the touchscreen.

The charging screen displays a representative image of the status of the Battery and information about your charging session including:

Note: To change how energy units are displayed, touch Controls > Display > Energy Display.

Note: The following illustration is provided for demonstration purposes only and may vary slightly depending on software version and market region.

Charging Status and Settings

  1. Charge status messages (such as Charging, Charging Scheduled) display here. While charging, the estimated time remaining to achieve your set limit is also displayed.
  2. Adjust the charge limit by touching Set Limit, and drag the arrow to move the charge limit setting. The setting you choose applies to immediate and scheduled charging sessions.
  3. The current automatically sets to the maximum current available from the attached charge cable, unless it was previously reduced to a lower level. If needed, touch - or + to change the current (for example, you may want to reduce the current if you are concerned about overloading a domestic wiring circuit shared by other equipment). It is not possible to set the charging current to a level that exceeds the maximum available from the attached charge cable. When you change the current, Model 3 remembers the location. If you charge at the same location, you do not need to change it again.

Note: If Model 3 is charging and detects unexpected fluctuations in input power, the charging current is automatically reduced by 25%. For example, a 40 amp current is reduced to 30 amps. This automatic current reduction increases robustness and safety in situations when an external problem exists (for example, a home wiring system, receptacle, adapter or cord is unable to meet its rated current capacity). As a precaution, when Model 3 automatically reduces current, it saves the reduced current at the charging location.

Although you can manually increase it, Tesla recommends charging at the lower current until the underlying problem is resolved and the charging location can provide consistent power.

  1. Touch to open the charge port door or to start (or stop) charging.
  2. Displays the total estimated driving distance or energy percentage (depending on your display setting) available.
  3. Shows if the charge cable is locked in the charge port or not. If Model 3 is not charging, you can touch the lock icon to unlock the charge cable from the charge port.

Note: In cold ambient temperatures below 41º F (5º C), the charge cable remains unlocked whenever the vehicle is not charging.

  1. Charging rate, estimated increase in driving distance (or energy) achieved so far in this charging session, current supplied/available from the connected power supply, and voltage supplied by the charge cable.
  2. Set a recurring charging schedule for the location

Note: If charging at a Tesla Supercharger, the charging screen also displays information about your previous or current Supercharger session

Note: To reduce congestion at high-usage supercharger sites, you may be automatically limited to a maximum charge of 80% when not using Trip Planner. You can manually increase the limit by tapping "Set Limit" on the touchscreen or mobile app.

During Charging
During charging, the charge port light (the Tesla "T" logo) pulses green, and the touchscreen displays the charging status. The frequency at which the charge port light pulses slows down ...

Scheduled Charging and Scheduled Departure
There are two ways in which you can schedule your vehicle's charging: Scheduled Charging: When you set a scheduled charging time, Model 3 displays the set time to begin charging when you ...

Other materials:

Quarter Window Glass Removal
1. Remove the following parts: a. Rear seat cushion. b. Rear scuff plate. c. Tire house trim. d. Trunk side upper trim. e. C-pillar trim. 2. Apply protective tape along the edge of the body and the quarter window glass. NOTE: For the areas of the sealant that are difficult ...

Oil Seal (Differential) Replacement [Fw6 A EL]
1. Remove the aerodynamic under cover No.2 and the splash shield as a single unit.. 2. Remove the oil seal. a. Drain the ATF.. b. Disconnect the drive shaft (LH) from the transaxle.. c. Disconnect the drive shaft (RH) from the joint shaft.. d. Remove the joint shaft.. CAUTION: ...

Rear Center Seat Belt Removal/Installation
CAUTION: The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor. 4SD 1. Remove the following parts: ...

2016-2022 Copyright